Removing Unix Client Software; Installing The Ppd File - Xerox DocuPrint Network Printer Series Client Manual

Removing UNIX client software

Installing the PPD file

GUIDE TO SUBMITTING JOBS FROM THE CLIENT
This section describes the procedure for removing the print
command client software. You may need to perform this procedure
prior to updating software, or to correct corrupted file installation on
the platform. The steps are shown below.
# cd /usr/xerox/nps/client
# rm cconf
# cd /usr/xerox/nps/client/bin
# rm listq
# rm print
# rm listjob
# cd ../man
# rm listq.1
# rm listjob.1
# rm print.1
# cd ../gpj
# rm XRXGPJ1.ps
# rm XRXGPJ2.ps
Note: If the wrong software has been loaded on the client, the
executable files may have the wrong extension. If this is the case,
delete everything under the above directories.
If there are any files named print, listq, or listjob in the directories,
/bin, or /usr/bin, delete them also.
You need to install the PostScript Printer Description (PPD) file for
your specific printer model. To do so, first determine the appropriate
directory for installing the PPD file by referring to your application
software documentation. Then enter the following:
cd <UNIX directory for PPD files>
ftp <DocuPrint Printer Controller>
Name: ftp
Password: <RETURN>
ftp> ls
ftp> bin
ftp> cd PPD <PPD file directory on Controller>
ftp> get <PPDfile>
ftp> quit
In the example above, <PPDfile> is the file for your printer model.
The files are stored in the PPD directory and named XDP####.PPD,
where #### is your DocuPrint model number; for example XDP
4890.PPD or XDP 4635.PPD.
SETTING UP WORKSTATIONS
2-13