Preparation For Use; Installing Batteries - Zenith SENTRY 2 Operation Manual & Warranty

REMOTE CONTROL MODEL SC3820
TV AND VCR OPERATIONAL NOTES
Some controls on the remote, like PLAY and VOLUME will
always operate the VCR or the TV. Whether other keys oper-
ate the TV or the VCR depends on the mode of the remote
control. For example, OFF-ON will turn the VCR ON and
OFF while the remote control is in the VCR mode. It will turn
the TV ON or OFF while the remote control is in the TV
mode.
Some of the functions provided by this remote control may
not be part of your TV and/or VCR. You will not be able to ac-
tivate those functions even though there is a control button on
the remote. For example, pressing TIMER provides direct ac-
cess to the Sleep Timer on many TVs. If your TV does not
have a Sleep Timer, pressing TIMER has no effect.
PREPARATION FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
INSTALLING BATTERIES
When the effective operating range of your remote becomes
noticeably shorter, replace the batteries with two (2) high qual-
ity, alkaline, size AAA batteries.
1. Remove the battery compartment cover, PUSH
DOWN tab and PULL OUT from top.
2. Insert new batteries as indicated in the diagram inside
the compartment.
3. Replace the cover by inserting the tab on the bottom
of the cover into its housing. Snap the cover into
position.
NOTES:
• Be careful not to place heavy objects on top of the remote
control buttons. Prolonged accidental operation of the re-
mote control will shorten battery life.
• If you do not use the remote control for a month or more,
remove the batteries. Battery leakage can cause damage to
the remote control.
• Zenith is not responsible for damage caused by such battery
leakage.
2s33-o 4 --3