Vcr Operations - Zenith SENTRY 2 Operation Manual & Warranty

REMOTE CONTROL MODEL SC3820
VCR OPERATIONS
The following functions and operations apply to Zenith VCR
models built after 1991.
For complete details on how to operate your Zenith VCR, re-
fer to the operating guide supplied with it.
The remote control must be in the VCR mode to operate your
VCR. Press MODE to select the VCR mode. The VCR indica-
tor lights when you are in the VCR mode.
MODE
Used to select the VCR mode of
operation.
VCR
Lights when VCR mode of
operation is selected.
MENU, SELECT, ADJUST
and QUIT
Used with on-screen menus and pro-
gramming options of the VCR. See
VCR operating gu'ide for details.
Numbered Buttons
Used to select a TV channel through
the VCR. Also, used to set the
timer in the VCR, and to enter pro-
gramming information.
ENTER
Used with the numbered buttons to se-
lect a TV channel through the VCR.
AM/PM
Used to set timer during program-
ming.
MEMORY
Used to activate the COUNTER
MEMORY feature.
Point toward your VCR.
®®®
®®®
®®®
OFF-ON J
NI
v I
SOURCE ]
0
FLASHBK
CHANNEL
IAI
w
TIMER
C]D
RECORD STOP PAUSE SEARCH
REW PLAY F FWD TV/VCR
OFF/ON
j Used to turn VCR ON or OFI_.
FLASHBK (Flashback)
Used during VCR playback to
_view the channel tuned by the
VCR.
CHANNEL Up/Down
Used to sequence through channels
on the VCR.
TIMER
Activates TIME RECORD on
some VCRs. See the VCR operat-
ing guide for details.
TVNCR
Used to select the source of the pro-
grams seen on the TV. Switches
the VCR between TV mode and
VCR mode.
TV Mode: Channels are selected
through the TV.
VCR Mode: Channels or tape op-
eration are selected through the
VCR.
_ RECORD, STOP, PAUSE,
SEARCH, REW, PLAY and
F FWD
Used for tape recording and play-
back functions. See the VCR operat-
ing guide for details.
2s3_-o 4 -- 2