REMOTE CONTROL MODEL MBR3430
PREPARATION
FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
INSTALLING
BATTERIES
When the effective operating range of your remote becomes
noticeably shorter, replace the batteries with two high-quality,
alkaline, size AAA batteries.
Zenith is not responsible for damage caused by battery leak-
age.
Atter installing new batteries, the remote control will set itself
to Zenith brand codes, as follows: TV=I01, VCR=201 and
CABLE=301.
If you are going to operate equipment that uses different
codes, the remote must be reprogrammed for those codes.
Step 1.
Step 2.
Step 3.
2_-o
4 -- 5