Bass; Treble; Balance; Audio - Zenith SENTRY 2 Operation Manual & Warranty

AUDIO MENU
AUDIO MENU
BASS
TREBLE
BALANCE
AUDIO
SEQ
L
| +
l +
I R
STEREO
ON
AUDIO MENU
AUDIO MENU
BASS - I +
TREBLE - I +
BALANCE L I R
SEQ ON
AUDIO MENU While
AUX Channel is Chosen
BASS
TREBLE
BALANCE
AUDIO
(AUDIO mode options
are not available while
AUX channel is chosen.
The signal being re-
ceived from the auxil-
iary source is assumed
to be stereo audio.
SEQ maybe switched
ON or OFF as desired.)
SEQ
(Spatial Equalization)
Adjusts the BASS (low-frequency) level.
Adjusts the TREBLE (high-frequency) level.
Adjusts the balance of sound between the left and right speakers.
Allows you to select STEREO, MONO or 2ND AUDIO/SAP speaker operation.
STEREO:
MONO:
2ND AUDIO/SAP:
Directs the sound to the left and right speakers as supplied bythe
program source (broadcast TV, VCR, etc.)
Directs the same sound to both left and right speakers even if the source
being received is in stereo.
Directs the sound for the second audio program (second language) to
both the left and right speakers. SAP sound is always monaural.
Improves tonal balance and increases apparent stereo separation to produce a spacious and more
tonal sound. SEQ is only available ifa stereo signal is being received and you have previously
selected STEREO using the AUDIO option.
To Access AUDIO MENU
Refer to the "Quick Reference to On-Screen Menus" sec-
tion for details.
NOTE: All adjustments on the AUDIO MENU are op-
tional. You do not have to use these features in order to use
your TV.
CH2
10:56
STEREO
STEREO is selected and a ste-
reo signal is being received. You
will hear stereo sound.
J
Audio Mode Shown in
Channel/Time Display
To Adjust BASS, TREBLE and BALANCE
Press ADJUST (ADJ) Left/Right until the most pleasing
sound is heard.
To Use AUDIO Mode Options
Press ADJUST (ADJ) Left/Right to select desired option.
We recommend that you use the STEREO option. The TV
will switch automatically between the STEREO and
MONO modes dependent on the signal being received.
lfyou prefer SAP, use the 2ND AUDIO/SAP option. On
those stations which broadcast two audio portions, you will
hear the SAP (usually a second language). When the SAP
broadcast ends, the TV switches automatically between
STEREO and MONO modes. The TV switches back to
2ND AUDIO/SAP when the SAP broadcast resumes.
-'/_-'-_) 7 -- 1