Table of Contents
Advertisement
GETTING TO KNOW YOUR REMOTE CONTROL
MODEL SC3820
TV AND VCR OPERATIONAL
NOTES
Some controls on the remote, like PLAY and VOLUME
will always operate the VCR or the TV. Whether other keys
operate the "IV or the VCR depends on the mode of the
remote control. For example, OFF/ON will turn the VCR
On and Off while the remote control is in the VCR mode. It
will turn the TV On or Offwhile the remote control is in the
TV mode.
Some of the functions provided by this remote control may
not be part of your TV and/or VCR. You will not be able to
activate those functions even though there is a control but-
ton on the remote. For example, pressing TIMER provides
direct access to the Sleep Timer on many TVs. If your TV
does not have a Sleep Timer, pressing TIMER has no effect.
PREPARATION
FOR USE
Batteries are provided with this remote, but you must install
them before using the remote.
INSTALLING
BATTERIES
Your remote control comes with batteries installed. When
its effective operating range becomes noticeably shorter,
replace the batteries with two (2) high quality, alkaline, size
AAA batteries.
1. Remove the battery compartment
cover, PUSH
DOWN tab and PULL OUT from top.
2. Insert new batteries as indicated in the diagram
inside the compartment.
3. Replace the cover by inserting the tab on the bottom
of the cover into its housing. Snap the cover into
position.
NOTES:
s
Be careful not to place heavy objects on top of the remote
control buttons. Prolonged accidental
operation of the
remote control will shorten battery life.
•
If you do not use the remote control for a month or more,
remove the batteries. Battery leakage can cause damage
to the remote control.
•
Zenith is not responsible for damage caused by such
battery leakage.
1
1
o
25_..o
3 - 3
Advertisement
Table of Contents
