Special Features - JVC HR-J620U Instructions Manual

Special Features
The provided remote control is capable of controlhng 10 different TV brands including JVC and 13 different Cable Box brands.
Follow the instructions below to set the appropriate code for your TV or Cable Box.
ENTER
VOL.
VCR switch
TV Multi-Brand Remote Control
If your TV ts a JVC, you don't have to set the TV code.
PREPARATION
[] Turn the TV's power OFF using the TV's remote control.
[] Set the remote control's TV/CABLENCR swttch to "TV".
[_] While holding dov,'ll the POWER button, enter your TV's
brand code with the Dnglt keys then press STOP.
• Brand setting is completed Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
• If you set the wrong code, re-enter the right code.
[] Press POWER to turn the TV power on and check to see if
the remote control works with the TV.
OPERATION
[] Set the remote control's TV/CABLENCR switch to "TV".
[] Operate the TV.
• POWER, TV/VIDEO, CH +[-, VOL. +/- buttons and Digit
keys are available.
[] To operate VCR, set the TV/CABLE/VCR switch to "VCR".
TV Brand Name And Code
TV BRAND NAME BRAND CODE
JVC
MAGNAVOX
MITSUBISHI
PANASONIC
RCA
SHARP
SONY
TOSHIBA
ZENITH
HITACHI
01
02
03
O4
05
O6
07
O8
09
10
Cable Box Brand Name And Code
CABLE BOX BRAND NAME BRAND CODE
GI
JERROLD
SCIENTIFIC ATLANTA
ZENITH
PIONEER
HAMLIN
REGAL
OAK
SIGMA
TOCOM
RCA
PANASONIC
SPRUCER
01,02,03,04,05,06,07,08
01,02,03,04,05,06,07,08
09,10
11,12
13,14
15,16,17,18
15,16,17,18
19,20,21
19,20,21
22,23
24,25,26
24,25,26
24,25,26
Cable Box Multi-Brand Remote Control
Some Cable Box brands have more than one code. When your
Cable Box does not function with a specified code, try other codes.
PREPARATION
[] Turn the Cable Box power OFF using the Cable Box's remote
control.
[] Set the remote control's TV/CABLE/VCR switch to
"CABLE".
[] While holding down the POWER button, enter your Cable
Box's brand code with the Digit keys then press STOP.
• Brand setting is completed. Once you set the brand, you do
not have to reset it until the remote's batteries are replaced.
• If you set the wrong code, re-enter the right code.
[] Press POWER to torn the Cable Box's power on and check to
see if the remote control works with the Cable Box.
OPERATION
[] Set the remote control's TV/CABLE/VCR switch to "CABLE".
[] Operate the Cable Box
• POWER, CH +/-, ENTER buttons and Digit keys are
available.
[] To operate VCR, set the TV/CABLE/VCR switch to "VCR".
25