Timer-Recording - JVC HR-J620U Instructions Manual

Timer-Recording
POR INSTRUCCIONES EN
ESPANOL VEA p.32 - 33.
With the On-Screen Timer Programming function introduced here you can directly program the VCR's timer to record up to 8 TV
shows, up to a year ahead. It's especially convenient when you want to timer-record program,, whale you're away from home for long
periods of time (over a week). TIMER PROGRAMMING IS NOT POSSIBLE UNLESS THE CLOCK HAS BEEN SET.
POWER ON;
SELECT CHANNEL
3 OR 4 (OR AV MODE)
I
-/
1
WEEKLY
4
Insert a cassette with the safety tab present.
• The VCR power wtll come on automatically. If watching
on channel 3 or 4 be sure that the VIDEO mdicator ts ]it. If
the indicator is not lit, press TV/VIDEO so that it lights.
• If the clock has not been set, set the clock before startmg
step 2. z:_" p 12
ACCESS THE ON-SCREEN MENU
Press MENU and then press SELECT.
• The Program Set screen wtll appear.
SELECT APROGRAM NUMBER "
Press SET to move to a vacant
program number, and then /'- PROGRAM
1
"-_
press SELECT. DATE --/--
• lnmallv all programs are __ STAnT .... AM /
- STOP -- - AM |
vacant, and the cursor is at CHANNEL
-- SP
program 1. So simply press PRESS (SELECT. SET÷/-) /
SELECT
Press SET to set the month,
and then press SELECT.
Press SET to set the day.
• The day of the week wdl
automatically appear.
• To record the program daffy
(Mon-Fri) press DAILY
(Digit key 8). To record the
t" "-- =
PROGRAM 1
| DATE 12/28 THU
l START .... AM
| STOP .... AM
CHANNEL -- SP
PRESS (SELECT, SET +/-)
program weekly press WEEKLY (Digit key 9). "DAILY"
or "WEEKLY" will appear on the screen.
Press SELECT.
(Continued on next page.)
l You can also use the MENU, SET and SELECT buttons on the VCR J
22