Table of Contents
Advertisement
24
EN
Rem ote
Control
Functions
VCR
N U M BER "1"
STO P
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
2
4
5
6
7
8
9
0
4
1
SPECIAL FEATU RES
Remote A/ B Code Sw itching
The remote control is capable of controlling two J VC video
recorders independently; one set to respond to the remote
control's A code control signals and another set to respond to B
code control signals. The remote control is preset to send A
code signals because your video recorder is initially set to
respond to A code signals. Y ou can easily modify your video
recorder to respond to B code signals.
REMO VE PO W ER SUPPLY
1
Unplug the mains power cord from the mains outlet.
SET REMO TE CO N TRO L
CO DE
2
While holding down VCR on the remote control, press
the N U M BER key "2" and then press STO P .
RE-SUPPLY PO W ER
3
Plug the mains power cord back into the mains outlet.
TURN THE RECO RDER O N
4
Press
on the remote control. The recorder will now
only respond to B code signals.
N O TE:
To set the recorder back to respond to A code signals, repeat the
same procedure as shown above except pressing N U M BER key
"1" instead of "2" in step 2 .
Advertisement
Table of Contents
