JVC HR-J620U Instructions Manual page 24

Q Timer-Recording (cont'd)
MENU
SELECT SET
Auto Timer
What this feature does: Usually, the turner mode ns not
engaged unless the TIMER button =s pressed But with AUTO
TIMER set to ON, the tzmer mode is automatically _ when
the VCR's power is turned off, and is _ whenever VCR
power IS turned on again.
[] After step 12 (_ p 23), press
SET to choose "ON", and press
MENU.
Or...
[] Press MENU, SET, and
SELECT as many times as
OFF
t PRESS (SET +I-)FOR CHOICE1
necessary to access the AUTO TINIER screen. (_ p 9)
[] Press SET to choose "ON".
[] Press MENU as many tmles as necessary to extt.
MENU
ET
To check and cancel programs
Make sure the timer mode is disengaged first. Then...
[] Press MENU and then press SELECT (to access the Program
Set screen).
[] Press SET to check through the programs in succession
To cancel the program...
[] Press CANCEL.
• Repeat steps 2 and 3 as necessary..
[] Press MENU as many times as necessary, to exit.
24