Removing The Housing - Epson Stylus Color 640 Service Manual

EPSON Stylus Color 440/640/740

4.2.1 Removing the Housing

Since the printer mechanism itself structures the bottom part, the printer
mechanism appears just by removing the housing.
1. Open the printer cover and turn the PG adjustment lever towards (+)
side.
2. Remove 4 screws (No.2) securing the housing, and remove the
housing.
Lift up and remove the housing, pulling it towards you.
(Since it collides with carriage)
Chapter 4 Disassembly and Assembly
(No.2)
Figure 4-2. Removing the Housing
Revision A
Housing
105