Epson Stylus Color 640 Service Manual page 84

EPSON Stylus Color 440/640/740
Error Status
Paper Out
Paper jam condition
No Ink cartridge or
Ink end (black)
No Ink cartridge or
Ink end (color)
Maintenance
request
Fatal error
Chapter 3 Troubleshooting
Table 3-3. Printer Condition and Panel Status
Indicators
Ink out Ink Out
Power
(Black) (Color)
--- --- ---
--- Off Off
--- On ---
--- --- On
Blink Blink Blink
Blink On On
Recovery
Paper Out
Load paper by pressing the load/eject
On
button.
Eliminate a paper then press the load/eject
Blink
button.
Install a new black ink cartridge by pressing
---
the load/eject button for 3 seconds.
Install a new color ink cartridge by pressing
---
the load/eject button for 3 seconds.
Change the waste ink drain tank and reset
Blink
the EEPROM.
Turn the printer off and on again. If the
Blink printer does not recover, repair the
appropriate part.
Revision A
84