Epson Stylus Color 640 Service Manual page 138

EPSON Stylus Color 440/640/740
5.2.2.2.1 Registering the printer model name
1. If no model name is registered, the screen shown below appears. Press
the E key while pressing the Alt key, and the program advances to
the Model Name Input Screen.
Figure 5-9. Model Name Null Condition
Figure 5-10. Model Name Input Screen
Chapter 5 Adjustment
2. Type the correct model name, referring to the box below.
Stylus_COLOR_440
Stylus_COLOR_640
Stylus_COLOR_740


" - " means a space.


Be sure to type the model name in exactly the
same way as shown above, paying attention
to the text formats, uppercase or lowercase.


If you mistype the model name, the program
will automatically return to the model name
input screen (Figure 5-10).
3.
For Stylus Color 740:
If the printer is Stylus Color 740, you must set
the correct CG,
sure to read the instructions below carefully to
take the proper steps.
After a few seconds, the model name appears on the Initial Screen
(2) (Figure 5-7). Proceed to one of the following steps.
If the printer is Stylus Color 440/640, return to
5.2.2.2 / Step 6.
If the printer is Stylus Color 740, proceed to
5.2.2.2.2 / Step 1.
Revision A
NLSP or Standard. Therefore, be
Section
Section
138