Control Two Jvc Vcrs; Plugin Powercord - JVC HR-VP638U Instructions Manual

A/B CODE
POWER
Control Two JVC VCRs
The supplied remote control is capable of controlling two JVC
VCRs independently using the A/B CODE switch. You can set
this VCR so it responds to remote commands only when the
switch is set to B, and another VCR so it respondsto commands
when the switch is set to A. The switch is preset to A because
this VCR normally responds to A-code signals. You can easily
modify this VCR to accept B-code commands.
UNPLUGVCR'S POWER
CORD
Unplug from the AC outlet.
SETA/B CODE SWITCH
Set the A/B CODE switch on the remote control to B.
PLUGIN POWERCORD
Plug back in to the AC outlet.
TURN VCR POWERON
Press POWER on the remote.
The VCR will now respond only to B-code commands.