Edit From A Camcorder - JVC HR-VP638U Instructions Manual

Edit From A
Camcorder
Recorder You r VC R
AUDIO
IN
Player
To rear panel PAUSE/SPECIAL
FUNCTION connector
Mini-plug cable (not supplied)
[ (JVC camcorder only)
AUDIO OUT
EDIT
[NUMBER "0"
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
Connect an AV cable between the camcorder's VIDEO
OUT and AUDIO OUT connectors and your VCR's
VIDEO IN and AUDIO IN connectors.
• When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
LOAD A CASSEI-IE
Insert the cassette to be recorded on into the recorder.
SETRECORDER'S INPUT
MODE
Press NUMBER key "0" to set to AUX.
ACCESSMAIN MENU
SCREEN
Press MENU as many times as necessary.
ACCESSFUNCTION SET
SCREEN
Press CHAr or SHUTILE PLUS AV to place the arrow
next to "FUNCTION SET", then press OK.
If you're using a JVC Master Edit Control-equipped
camcorder -- step 6
If not -- step 9
ACCESSSPECIAL
FUNCTION SCREEN
Press CHAr or SHUTTLE PLUS AV to place the arrow
next to "SPECIAL FUNCTION", then press OK.
SELECT MODE
Press CHAr or SHUI-I'LE
PLUS AV to place the
arrow next to "PAUSE".
SPECIAL FUNCTION
"-,-PAUSE
AV COMPU-I.INK
PRESS (A,V) TO SELECT
PRESS (MENU) TO END
RETURN TO FUNCTION
SETSCREEN
Press MENU.