Table of Contents
Advertisement
NUMBER
SHUTTLE
PLUS I
**AUTO
DAYLIGHT
SAVING TIME
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated,...
•.. on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
•.. on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
Auto
SELECT MODE
At the Override Auto Clock Set screen, place the arrow
next to "AUTO CLOCK SET" by pressing CHAr
or
SHUTTLE PLUS AV, then power off the VCR. Do not
power it on again until the clock has been adjusted.
The clock is automatically adjusted on the hour except
at 11:00 PM, midnight,
1:00 AM and 2:00 AM.
SELECT D.S.T.MODE
You have three choices:
t
a-Select "AUTO" and
the
I
D.S.T. SELECT
adjustment to your VCR's
"-_AUTO
clock will be made
ON
according to the incoming
OFF
signal from the host
channel.
"
PRESS (A,v)
TO SELECT
b-Select "ON" and the
PRESS (MENU) TO
END
adjustment will be made
based on the clock itself.
c-Select "OFF" if Daylight Saving Time doesn't apply to
you.
Place the arrow next to your choice by pressing CHAr
or SHUTTLE PLUS AV, then press MENU and the
Semi-Auto Clock Set screen reappears.
IMPORTANT
After setting
the Semi-Auto
clock
set, make sure that the VCR
is off before the next hour so that the clock can be adjusted.
(The clock is automatically
adjusted
on the hour except
at
11:00 PM, midnight,
1:00 AM and 2:00 AM.)
Monuol
SELECT MODE
At the Override Auto Clock Set screen 0:_' pg. 10), place
the arrow next to "MANUAL CLOCK SET" by pressing
CH&V
or SHUnLE PLUS Av, then press OK.
SETDATE,TIME AND D.S.T.
The Manual Clock Set
screen is displayed and the
first setting that can be set
begins flashing.
Press the appropriate
NUMBER keys to set the.
date and time (if only 1
digit, press "0" first). Press
CH&V
or SHUTTLE PLUS
\
MANUN. CLOCKSET
i
]
DATE
1/1/96 MON
TIME
--:--AM
D.S.T.
ON
PRESS NUMBER K EY(O-9)
OR(A,.), THEN (OK)
PRE_ (MENU)
TOEND
AV to set AM/PM and D.S.T. (Daylight Saving _me) to
"ON" (automatic adjustment based on VCR's clock) or
"OFF" (if D.S.T. doesn't apply to you).
PressOK after AMiPM and D.S.T. settings. The next
setting that can be set begins flashing. When you're
finished with this set-up procedure, press MENU to start
the clock.
NOTE:
CHAr
and SHUTTLE PLUS AV can be used to perform
all operations. (In this case, press OK after each setting.)
MAKE CORRECTIONS
To change any of the settings, press OK or SHUTTLE
PLUS _
_
until the item you want to change
blinks, then set as in step 6.
_o-
Advertisement
Table of Contents
