Brother MFC-9130CW Quick Setup Manual page 32

For Wireless Network Users
Error Code
The machine cannot detect a wireless access point/router that has WPS or AOSS™
enabled.
To configure your wireless settings using WPS or AOSS™, you must operate both your
machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.
TS-07
If you do not know how to operate your wireless access point/router using WPS or AOSS™,
see the documentation provided with your wireless access point/router, ask the manufacturer
of your wireless access point/router, or ask your network administrator.
Two or more wireless access points/routers that have WPS or AOSS™ enabled are
detected.
TS-08 - Confirm that only one wireless access point/router within range has WPS or AOSS™
- Try starting again after a few minutes in order to avoid interference from other wireless
32
active and try again.
access points/routers.
Recommended Solutions