Brother MFC-9130CW Quick Setup Manual page 19

Wired Network
For Macintosh Wired Network Interface Users
(Mac OS X v10.6.8, 10.7.x, 10.8.x) (MFC-9330CDW / MFC-9340CDW)
16
Before you install
IMPORTANT
For Mac OS X v10.6.7 or lower users: upgrade to
Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
a
Make sure your machine is connected to an AC
power source and your Macintosh is ON. You
must be logged on with Administrator rights.
b
Remove the protective cap from the Ethernet
port marked with a
machine.
c
Connect the network interface cable to the
Ethernet port on your machine, and then
connect it to a free port on your hub.
d
Make sure your machine is turned on.
symbol on your
Macintosh
17
Install MFL-Pro Suite
a
Put the CD-ROM into your CD-ROM drive, and
then double-click the BROTHER icon on your
desktop.
b
Double-click the Start Here OSX icon. If
prompted, select your model.
c
Choose Wired Network Connection
(Ethernet), and then click Next.
d
The installation screens appear one after
another. If prompted, follow any on-screen
instructions.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
e
Choose your machine from the list, and then
click Next.
NOTE
If your machine is not found over the network,
confirm your network settings (see Before you
install on page 19).
19