Changing Snmp Settings - Kyocera TASKalfa 650c Operator's Manual

3 USEFUL FUNCTIONS AND SETTINGS

Changing SNMP settings

If you cannot find the target same series MFPs on your network, the problem may be with SNMP settings. Verify the
correct SNMP settings in the SNMP Settings dialog box and change the settings, if needed. The dialog box can be
accessed by clicking [SNMP Settings] on the Manual Selection (
Ask the administrator for details on the SNMP Network settings configured for your machine.
1
2
3
1) Version
Be sure to have the correct SNMP version set for your machine and select from the following options:
- V1/V2—Select this option to enable SNMPv1 and v2.
- V3—Select this option to enable SNMPv3.
- V1/V2/V3 (for Discovery Settings dialog box only)—Select this option to enable SNMPv1, v2, and v3.
To find your machine under the SNMPv1/v2 environment, the SNMP read community name that is set for the target
same series MFP must be "public." For help, consult the administrator.
2) SNMP V3
If SNMPv3 is enabled, use the radio button to select the method for authenticating users.
User ID File—Select this option when you want to use a user ID file. Click [Browse] and specify the user ID file.
User Name/Password—Select this option when you want to use the user name and password. When this option is
selected, enter or select each of the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password
If you select to enable SNMPv3, consult your network administrator for preliminary advice on how to
authenticate users.
Each entry for User Name, Authentication Password, and Privacy Password can consist of up to 32 one-byte
alphanumeric characters.
3) [Restore Default]
Click this button when you want to reset all the settings back to the defaults.
34 Changing Network Discovery Settings
P.17) or the Discovery Settings ( P.33) dialog box.