Booklet Details - Kyocera TASKalfa 650c Printing Manual

2 PRINTING FROM WINDOWS
5) Hole Punch
This sets whether a print job is printed with hole punches.
- Center Top — Select this to create holes along the top edge and print.
- Middle Left — Select this to create holes along the left side and print.
– Hole punching can be selected only when a Hole Punch Unit (optional) is installed.
– The "Hole Punch" option is not available when 2-Sided printing is selected together with the Magazine sort
function.
For the detailed instructions on how to print with the [Hole Punch] setting, see the following page:
& P.73 "Hole punching"
6) Use Custom Margin
Select this check box to set the margin on the printed pages. When this box is selected, click [Detail...] to set the
margins in the [Custom Margin] dialog box.
The margin range is between 4.2 mm and 100 mm (0.17 inch and 3.94 inch). Less than 4.2 mm cannot be set for the
range.
– If [Booklet] is selected on [2-Sided Printing], this option will be disabled.
– Enable this function to add the margins if the application does not support the margin function. When the
application has the margin function, use the application's function rather than this option.
– This cannot specify the binding margin for Booklet printing.

Booklet Details

In the [Booklet Details] dialog box, you can specify how Booklet printing is performed.
1
2
3
4
5
6
7
1) Output Document Layout
Select the booklet size to be made.
- A5 on A4 — Select this to print an A5 size booklet. Every 2 pages are printed on A4 paper to fit on half a sheet
(A5).
- A4 on A3 — Select this to print an A4 size booklet. Every 2 pages are printed on A3 paper to fit on half a sheet
(A4).
32 Setting Up Print Options