Charging Battery - Panasonic Lumix DMC-ZS10 Owner's Manual

Advanced features
Hide thumbs Also See for Lumix DMC-ZS10:
Table of Contents

Advertisement

Charging battery
Always
charge before first use! (battery shipped uncharged)
IIAbout
batteries
that you can use with this unit
It has been found that counterfeit battery packs which look very similar to the genuine
products are made available to purchase in some markets. Some of these battery
packs are not adequately protected with internal protection to meet the requirements
of appropriate safety standards. There is a possibility that these battery packs may
lead to fire or explosion. Please be advised that we are not liable for any accident or
failure occurring as a result of use of a counterfeit battery pack. To ensure that safe
products are used we recommend that a genuine Panasonic battery pack is used.
• Use the dedicated
charger and battery.
• The camera has a function
for distinguishing
batteries which can be used
safely. The dedicated
battery supports
this function.
The only batteries
suitable for use with this unit are genuine
Panasonic
products and batteries
manufactured
by other companies
and certified
by Panasonic.
(Batteries
which
do not support this function
cannot be used). Panasonic
cannot in any way
guarantee
the quality, performance
or safety of batteries which have been
manufactured
by other companies
and are not genuine Panasonic
products.
Insert the battery terminals and attach the battery
to the charger
Connect the charger to the electrical outlet
Plug-in type
_inlet
type
Battery
Charging light
([CHARGE])
On:
• The AC
cable does
Off: Charging complete
Charger
not fit
(model-specific)
entirely
into
If light is flashing:
the AC input
° Charging may take longer
terminal. A gap will remain,
than normal if battery
_Charge
the battery with the charger indoors
temperature
is too high or
(10 °C - 30 °C (50 °F to 86 °F)).
too low (charging may not be
completed).
Detach the battery after charging
is
• Battery/chargerconnector
is
completed
dirty. Clean with a dry cloth.
eThe battery charger is in the standby condition when the AC power is supplied.
The primary circuit is always "live" as long as the battery charger is connected
to
an electrical
outlet.
0
VQT3G90

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents