Settings,
notes
_z [Sleep Mode]
[2 MIN.]I[5 MIN.]/[10
MIN.]/[OFF]:
Automatically shut off power while not in use.
• To restore --, Press the shutter button halfway, or turn on
the power again.
• Cannot be used in the following cases:
When using AC adaptor (optional) and DC coupler
(optional), when connected to computer/printer, during
motion picture recording/playback,
during Slide Shows,
during automatic demo playback
• Selings
fixed to [5 MIN.] in [Intelligent Auto] Mode.
1_1 [LCD Power Save]
[ON]/[OFF]:
The LCD monitor goes dark to minimize power
consumption.
Reduces
the picture quality of the LCD monitor display
during recording to minimize
battery consumption
(except for the Digital Zoom area). Note, however, that
there is no effect on the recorded picture.
• The setting in [LCD Mode] is prioritized
over the setting
in [LCD Power Save] for the brightness
of the LCD
monitor.
[1 SEC.]/[2 SEC.]
[HOLD]: Auto review screen remains until a button (other
[OFF]
than the [DtSP.] button) is pressed
• Fixed to [2 SEC.] in [Intelligent Auto] Mode.
• In [Panorama Assist], [Handheld
Night Shot], [Flash
Burst], and [Photo Frame] Scene Modes, or in [Auto
Bracket], and [Burst] Mode, Auto Review performed
regardless
of setting.
° Motion pictures cannot be automatically
reviewed.
VQT3G90
45