Charging The Battery - Panasonic DMC-LC5PP Operating Instructions Manual

` Charging the Battery
f 1 Setthe power switch to [OFF].
Insert the battery into the
camera. (P14)
2
3 Open the terminal door.
@): How to open the terminal door
4 Insert the connection plug of the AC
adaptor into the DC IN socket of the
camera.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
5 Plug the AC adaptor into the
electrical outlet.
* The green status indicator CD blinks
and charging starts.
6 when the status indicator stops
blinking, charging is complete.
* After charging is finished, remove the
AC adaptor from the electrical outlet
and then remove the connecting plug
from the DC IN socket.
E Battery indicator
The remaining battery power is displayed on the LCD monitor. (This is not
displayed when using AC adaptor)
£22): The battery power is sufficient
fez]: The remaining power is a little low
{ame : The remaining power is low
n — E Replace or recharge the battery
15