Panasonic Lumix DMC-ZS10 Owner's Manual page 43

Settings, notes
[0] 1 [1] / [2] / [3] / [4] / [5] / [6]
• Cannot be used to adjust TV speaker volume when
connected to TV.
[C1] / [C2] / [C3]
A_ [Auto Power LCD]:
The brightness is adjusted automatically depending on
how bright it is around the camera.
[Power LCD]:
Makes screen brighter than normal (for outdoor use).
[OFF]
• [Auto Power LCD] does not work in Playback Mode.
• [Power LCD] returns to ordinary brightness if there is no
operation for 30 seconds when recording. (Press any
button to make brighter again.)
° Because the picture shown on the LCD monitor screen
emphasizes brightness, some subjects may look different
than their actual appearance, but this will not affect the
recorded picture.
• Setting [LCD Mode] will reduce the number of pictures
that can be recorded and recording time.
[Rec. lnfo.]
[ON] (Display recording information with guide lines.)
[OFF]
[Pattern]
I_ / t_ : Change the patterns of guide lines.
° When [Intelligent Auto] Mode has been selected, only I_
is displayed. Also recording information and guidelines
cannot be displayed simultaneously.
VQT3G90
43