Panasonic Lumix DMC-ZS10 Owner's Manual page 13

By using the AC adaptor (optional) and DC coupler (optional), you can record and play
back without worrying about the remaining battery charge.
The optional DC coupler can only be used with the designated Panasonic AC adaptor.
Insert DC coupler instead of
battery (-_12)
DC IN
coupler
Open DC coupler cover
if difficult to open, with the card/
battery door open, press the DC
coupler cover from the inside to open
it.
DC cot
cover
AC adaptor
t__ Alig_ marks to
connect
Plug AC adaptor into power
outlet
Connect AC adaptor to DC IN
socket of DC coupler
_Always use a genuine Panasonic AC adaptor (optional).
Use the AC adaptor and DC coupler specifically for this camera. Using other adaptors
or couplers could cause camera failure.
It may not be possible to install camera on a tripod or unipod when the DC coupler is
connected, depending on the type of tripod or unipod.
÷When the AC adaptor is connected, always remove the AC adaptor when opening the
card/battery door.
÷Remove the AC adaptor and DC coupler when not in use and close the DC coupler
cover.
®Also read the AC adaptor and DC coupler operating instructions.
.VQT3G90
13