Vulcan-Hart VF SERIES Installation & Operation Manual page 2

MODELS VF1, VMF1, VF2, VMF2, VF1D,
SAVE THESE INSTRUCTIONS FOR FUTURE USE
Standard features include stainless steel fry tank and front, a high limit device, twin baskets, and a lift-
out fry tank (20" wide models only) which is easily removed for cleaning.
VF1, VF2, VF1D and VF2D floor model fryers are equipped with 6" adjustable legs. They may be
ordered without legs for installation on a masonry base. The fryers also can be supplied with a 4" toe
base in place of legs as an optional extra.
Optional features include extra fry tanks, a large single basket supplied in place of twin baskets, syphon
and strainer bags, casters (floor models only), stainless steel fry tank cover, and extra sets of twin
baskets or single baskets. Stainless steel side(s) and back are also available optionally.
MODEL
VF1
VMF1
VF2
VMF2
VF1D
VMF1D
VF2D
VMF2D
VF90/VFD90
The VF90 and VFD90 Frymate Work Stations may be installed next to any of the VF Series Fryers.
The top draining section has a lift-out screen and center drain into a 3-quart, slide-out drain pan. The
interior of the cabinet has storage space for 4 standard #200 pans in drawer-type, non-tilt pan slides.
Pans are not supplied with the Frymate.
The Frymate is equipped with 6" adjustable legs. It may be ordered without legs for installation on a
masonry base, or with a 4" toe base in place of legs as an optional extra.
Installation, Operation and Care of
VMF1D, VF2D & VMF2D
ELECTRIC FRYERS
WIDTH / STYLE
20" Floor model
20" Countertop
24" Floor model
24" Countertop
20" Floor model
20" Countertop
24" Floor model
24" Countertop
20" Frymate
GENERAL
CONTROLS
Mechanical
Mechanical
Mechanical
Mechanical
Solid State
Solid State
Solid State
Solid State
N/A
— 2 —
AUTOMATIC
BASKET MELT
LIFT CYCLE
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
Opt.
N/A
Opt.
Opt.
Opt.
Opt.
Std.
Std.
Std.
Std.
N/A