Maintenance; Troubleshooting - Vulcan-Hart GHCB40C ML-52212 Installation & Operation Manual

WARNING: THE BROILER AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING,
CLEANING AND SERVICING THE BROILER.
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
The efficient operation of this broiler depends upon a rather delicate balance between the volume of
gas and the supply of air. Unless complete combustion of the gas is achieved, poor operating
characteristics and excessive gas consumption can occur.
Periodic adjustment and cleaning of the burners by an authorized servicer is recommended.
LUBRICATION
No lubrication is needed for the IR or GH Models.
VENT
Annually check the flue, when cool, to be sure it is free of obstructions.
CHECKS TO BE MADE BEFORE CALLING THE SERVICER
1. Make sure the gas supply is on.
2. Make sure the store electric supply is on (Infrared Models only).
3. Make sure the broiler is plugged in (Infrared Models only).
4. Make sure the pilot light is lit.
SERVICE AND PARTS INFORMATION
To obtain service and parts information concerning this charbroiler, contact the Authorized Service
Agency in your area (refer to our website, www.vulcanhart.com for a complete listing of Authorized
Service and Parts depots) or contact 1-800-814-2028 for Technical Service and Parts Assistance.
When calling for service, the following information must be available: model number, serial number,
manufacture date (MD) and voltage.

MAINTENANCE

TROUBLESHOOTING

– 25 –