Vulcan-Hart GHCB40 Specifications

SPECIFICATIONS
Heavy duty single section gas ceramic broiler with nishing oven.
Vulcan-Hart Model No. GHCB40. Stainless steel body and 6"
adjustable legs. 1 ⁄ " diameter front gas manifold. Four 25,000
1
4
BTU/hr. ceramic burners, 100,000 BTU/hr. input. Pilot ignition
system. Two in nite heat control valves. Floating grid .
assembly with positive positioning control handle. Eight grid
positions. Broiler grid measures 25"w x 27
nishing oven heated by broiler burners. Standard oven mea-
sures 26"w x 28"d x 14"h. Porcelain enamel on steel hearth,
door and side liners. One oven rack and two rack positions.
50,000 BTU/hr. "Flame Retention" burner with pilot ignition.
Thermostat adjusts from 150° to 500°F. Oven controls located in
the cool zone.
Exterior dimensions: 34"w x 39
CSA design certi ed. NSF listed.
SPECIFY TYPE OF GAS WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
F-31539 (05-06)
⁄ "d. 26"w x 28"d
1
2
⁄ "d x 79"h on 6" legs.
1
8
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Item # __________________________
MODEL GHCB40
HEAVY DUTY GAS CERAMIC BROILER WITH
FINISHING OVEN AND OVEN BASE
GHCB40 Ceramic Broiler with Finishing Oven
and Standard Oven Base
GHCB40C Ceramic Broiler with Finishing Oven
and Convection Oven Base
STANDARD FEATURES
Stainless steel body and 6" adjustable legs.
1 ⁄ " diameter front gas manifold.
1
4
Four 25,000 BTU/hr. ceramic burners, 100,000 BTU/hr. input.
Pilot ignition system.
Two in nite heat control valves.
Floating grid rack assembly with positive positioning
control handle. Eight grid positions. Broiler grid measures
25"w x 27 ⁄ "d.
1
2
26"w x 28"d nishing oven heated by broiler burners.
Oven interior measures 26"w x 28"d x 14"h. Porcelain
enamel on steel hearth, door and side liners. One oven rack
and two rack positions. 50,000 BTU/hr. "Flame Retention"
burner with pilot ignition. Thermostat adjusts from 150° to
500°F. Oven controls located in the cool zone.
One year limited parts and labor warranty.
OPTIONS
Stainless steel back nishing panel.
Common front top ledge up to 68" wide. (Not for use on griddle
tops, spreader plates and deep fat fryers.)
Cap and cover manifold end(s). (No charge.)
1 ⁄ " stainless steel toe base, 74
5
8
Set of four 5" diameter casters, two locking.
Stainless steel dolly frame with casters, up to 102" wide.
Cooling fan for Snorkel convection oven motor. Required
when unit is installed with a back nishing panel or a toe base.
Rear gas connection. (Reference spec sheet F-31525.)
Second year extended limited parts and labor warranty.
Convection oven in place of standard oven. Add su x "C" to
the model number.
ACCESSORIES
Additional oven rack(s).
Gas pressure regulator (specify size and type of gas).
Flexible gas hose with quick disconnect and restraining
device. Consult price book for available sizes.
C.S.I. Section 11420
⁄ " overall height.
5
8