Printing A Poster; Scaling; Setting Scaling On The Page - Kyocera TASKalfa 300i User Manual

Printing a Poster

1
2
3
4
5
6

Scaling

Setting Scaling on the Page

1
2
KX DRIVER
Print crop marks
This selection prints a border at the edges of each poster sheet. You can
crop each sheet on the border before assembling the sheets. This option
ensures that data on adjoining sheets matches precisely.
Print assembly marks
This selection prints numbers at the edges of each sheet, matching numbers
on adjoining sheets. Assemble each sheet edge to the same numbered edge
on another sheet.
Use Print format to print a proof sheet, along with the poster, to guide you in
assembling the printed poster sheets.
Poster pages
This selection prints all of the sheets to be assembled as a poster.
Proof sheet
This selection prints all the poster pages on one sheet with markings that
display the sheet assembly.
Poster pages and proof sheet
This selection prints all poster sheets and a one-page proof sheet.
To print a poster or banner, follow these steps:
In the Layout tab, select Poster.
In Sheets per page, select the poster size. Each option describes the number
of sheets it takes to represent one finished poster page.
Click Poster Settings to select options in any combination. These options
ensure a precise assembly of the pages to create the poster.
In Print format, select one of the options for a finished print format.
Click OK to return to the Print dialog box.
Click OK to begin printing.
Scaling increases or decreases text and graphics on a page. You can also
select a gutter setting in the Finishing tab that enlarges the margins to
accommodate an easier assembly of pages into a booklet. Scaling is not
available when Booklet, Poster or Multiple pages per sheet is selected.
To set scaling values, follow these steps.
In the Layout tab, select Scaling.
Type or select a percentage between 20 to 500.
Layout
5-3