Printer Driver Settings Access; Changing The Default Driver Settings - Kyocera TASKalfa 300i User Manual

Installation
3
4

Printer Driver Settings Access

Changing the Default Driver Settings

1
2
3
1-8
The Add Printer Wizard appears. The wizard provides you with step by step
driver installation instructions. Follow the instructions on each page, and then
click Next to proceed to the next page.
Note: If the Found New Hardware Wizard page appears, click Cancel. If the
Hardware Installation warning dialog box appears, click Continue Anyway.
When the Completing the Add Printer Wizard page appears, installation of
the printer driver is now complete. To close the Add Printer Wizard, click
Finish. If prompted, restart your computer.
The printer driver software can be accessed from the Print dialog box of an
application, or from Start. If accessed from an application, then changes made
to driver settings remain in effect until the application ends. If accessed from
Start, changes are maintained as the default printer settings.
The Reset button is only available when you access Preferences or
Properties from the Print dialog box of an application. Default driver settings
apply to printing jobs initiated from any application, but they are overridden by
setting changes made within each application.
Click Start then click Control Panel and double-click Printers (Windows Vista),
or Printers and Faxes (Windows XP).
Right-click on your printing system icon.
Click Printing Preferences.
User Guide