Step By Step Chart For Wireless Network Configuration; For Infrastructure Mode - Brother MFC-8690DW User Manual

Step by step chart for wireless network configuration

For Infrastructure mode

a
Confirm your network environment. See page 27.
Infrastructure mode
Connected to a computer with an access point
b
Confirm your wireless network setup method. See page 28.
SES/WPS/AOSS™
Using the Setup
Wizard from the
control panel
(Recommended)
c
Configure your machine for a wireless network. See page 31.
See page 31
Installing drivers and software (See the Quick Setup Guide)
Wireless configuration and installing drivers and software have been completed.
Configuring your machine for a wireless network (For MFC-8690DW and MFC-8890DW)
Using the
Using the PIN
control panel
Method of Wi-Fi
menu
Protected Setup
(Automatic
Wireless mode)
See page 36 See page 39
Ad-hoc mode
or
Connected to a wireless capable computer
without an access point
Temporarily using
a network cable
(Windows
See page 41
(Macintosh)
See page 68
See page 26
Using the Brother
installer
application
Using the
SES/WPS/AOSS™
control panel
menu
(Automatic
Wireless mode)
® ®
) (Windows
See page 51
(Macintosh)
See page 78
3
3
3
)
25