Brother MFC-8690DW User Manual page 49

LCD messages when using the SES/WPS/AOSS™ control panel menu
LCD shows
Searching or accessing the access
point, and downloading settings from the
Setting WLAN
access point
Connecting SES
Connecting the access point
Connecting WPS
Connecting AOSS
Connection succeeded.
Connected
Session overlap has been detected.
Connection Error
The access point detection failed.
No Access Point
Connection failed.
Connection Fail
®
(Windows )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.
Configuring your machine for a wireless network (For MFC-8690DW and MFC-8890DW)
Connection status Action
—
—
—
Check that only one router or access point has
the SecureEasySetup™ mode, the Wi-Fi
Protected Setup mode or AOSS™ mode enabled
and try starting from step c again.
Move the machine closer to your access
point/router and try starting from step c again.
1 Try starting from step c again.
2 If the same message continues, reset the
machine back to the factory settings and try
again.
3
3
38