Configuration Methods; Step By Step Chart For Wi-Fi Direct Network Configuration - Brother MFC-J4410DW Manual

2

Configuration methods

Step by step chart for Wi-Fi Direct network configuration

The following instructions offer five methods for configuring your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
Check your mobile device for configuration.
Does your mobile device support Wi-Fi Direct?
Yes
Does your mobile device support one-push
configuration for Wi-Fi Direct?
Yes
See One-push
configuration using
Wi-Fi Direct.
1
If you cannot connect successfully when using Android™ 4.0, see One-push configuration using Wi-Fi Direct.
 One-push configuration using Wi-Fi Direct
For MFC-J2510/J4510DW, see One-push configuration using Wi-Fi Direct on page 5.
For DCP-J4110DW, MFC-J4410DW/J4610DW, see One-push configuration using Wi-Fi Direct
on page 10.
 One-push configuration using WPS (Wi-Fi Protected Setup)
For MFC-J2510/J4510DW, see One-push configuration using WPS (Wi-Fi Protected Setup) on page 6.
For DCP-J4110DW, MFC-J4410DW/J4610DW, see One-push configuration using WPS (Wi-Fi Protected
Setup) on page 10.
 PIN Method configuration using Wi-Fi Direct
For MFC-J2510/J4510DW, see Configuration using the PIN Method of Wi-Fi Direct on page 6.
No
See PIN Method
configuration using Wi-Fi
1
Direct.
No
Does your mobile device support WPS (Wi-Fi Protected
Setup) ?
Yes
Does your mobile device support one-push
configuration for WPS (Wi-Fi Protected Setup) ?
Yes
See One-push
configuration using WPS
(Wi-Fi Protected Setup).
No
See Manual wireless
configuration.
No
See PIN Method
configuration using WPS
(Wi-Fi Protected Setup).
2
2
2
3