Brother MFC-8690DW User Manual page 92

Wireless configuration for Macintosh using the Brother installer application (For MFC-8690DW and MFC-8890DW)
LCD messages when using the SES/WPS/AOSS™ control panel menu
LCD shows
Setting WLAN
Connecting SES
Connecting WPS
Connecting AOSS
Connected
Connection Error
No Access Point
Connection Fail
m
Click Next.
Connection status
Searching or accessing the access
point, and downloading settings from the
access point
Connecting the access point
Connection succeeded.
Session overlap has been detected.
The access point detection failed.
Connection failed.
Action
—
—
—
Check that only one router or access point has
the SecureEasySetup™ mode, the Wi-Fi
Protected Setup mode or AOSS™ mode enabled
and try starting from step i again.
Move the machine closer to your access
point/router and try starting from step i again.
1 Try starting from step i again.
2 If the same message continues, reset the
machine back to the factory settings and try
again.
5
5
81