Ses/Wps Or Aoss™ (Mfc-8690Dw And Mfc-8890Dw Wireless Network Only); Wps W/Pin Code (Mfc-8690Dw And Mfc-8890Dw Wireless Network Only); Wlan Status (Mfc-8690Dw And Mfc-8890Dw Wireless Network Only) - Brother MFC-8690DW User Manual

SES/WPS or AOSS™ (MFC-8690DW and MFC-8890DW wireless network only)
If your wireless access point supports either SecureEasySetup™, Wi-Fi Protected Setup (PBC
(one-push method), you can configure the machine easily without a computer. Your Brother machine has the
SES/WPS/AOSS™ menu on the control panel. This feature automatically detects which mode your access
point uses, SecureEasySetup™, Wi-Fi Protected Setup or AOSS™. By pushing a button on the wireless
access point/router and the machine, you can setup the wireless network and security settings. See the user's
guide for your wireless access point/router for instructions on how to access one-push mode. (For more
information, see the Quick Setup Guide or Using the SES/WPS or AOSS™ control panel menu to configure
your machine for a wireless network (Automatic Wireless mode) on page 36.)
1
Push Button Configuration

WPS w/PIN Code (MFC-8690DW and MFC-8890DW wireless network only)

If your wireless access point supports Wi-Fi Protected Setup (PIN Method), you can configure the machine
easily without a computer. The PIN (Personal Identification Number) Method is one of the connection
methods developed by the Wi-Fi Alliance
to the Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user's guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode. (For more information, see Using the PIN Method of Wi-Fi Protected Setup
on page 39.)

WLAN Status (MFC-8690DW and MFC-8890DW wireless network only)

Status
This field displays the current wireless network status; Active(11b), Active(11g),
Wired LAN Active, WLAN OFF, AOSS Active or Connection Fail.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose WLAN.
Press OK.
d
Press a or b to choose WLAN Status.
Press OK.
e
Press a or b to choose Status.
Press OK.
f
The current wireless network status will be displayed; Active(11b), Active(11g),
Wired LAN Active, WLAN OFF, AOSS Active or Connection Fail.
g
Press Stop/Exit.
®
. By inputting a PIN which is created by an Enrollee (your machine)
Control panel setup
6
1
) or AOSS™
6
6
6
6
102