Fig. 12 Raising Of Sprocket Lock Levers; Fig. 13 Engagement Of Paper Feed Holes On Feeding Pins - Epson MX-80F/T Operation Manual

STEP 8. Raise the two sprocket lock levers to loosen, and adjust the sprocket
pin position to the paper width. (See Fig. 12.)
Paper Holding Cover
ket Lock Lever
Fig. 12 Raising of Sprocket Lock Levers
, STEP 9. Engage the paper feed holes of the paper on the feeding pins, push the
scale back into position, and adjust the tension of the paper. Then
push the paper holding covers and the two sprocket lock levers
down. (See Fig. 13.)
NOTE: In
this case, confirm that the feeding pins are centered in the respec-
tive paper feed holes of the paper.
ocket Lock Lever
Fig. 13 Engagement of Paper Feed Holes on Feeding Pins
- 1 0 -