Table of Contents
Advertisement
6. Dismounting of Tractor Unit
The tractor unit of the MX-80 F/T is detachable. If it is an obstacle when using
roll paper, it can be taken out as follows;
STEP 1. Release the lock levers of the tractor unit by pulling in the direction as
shown in Fig. 9.
STEP 2. Keep pulling the levers and pull up the tractor unit
To install the tractor unit, hook the notches of the tractor frames onto the shaft
shown in Fig. 10 and then push down the tractor unit.
Lock lever
Fig. 9 Dismounting
Fig. 10 Mounting of Tractor Unit
- 8 -
Tractor Unit
of
Advertisement
Table of Contents
