Installing And Charging The Battery - Universal Remote Control COMPLETE CONTROL MX-880Z User Manual

MX-880Z O M
WNERS ANUAL

Installing and Charging the Battery

Open the battery cover by pressing
on the release clip and removing
the cover.
Note that the three contacts on the
battery must connect to the three
spring-loaded contacts in the MX-
880Z. Angle the battery into the
battery compartment, contacts first,
then gently fit the rear of the battery
into the compartment as well.
Replace the battery cover by insert-
ing the hinged end in first, then
snapping the cover back into place.
You can charge the Lithium Ion bat-
tery by simply plugging the includ-
ed charger into the base of the
remote as shown here.
The MX-880Z can be used while
charging.
Page 3