4
Diagnostics and Troubleshooting
Diagnostic information about the switch is available through the switch LEDs and the port LEDs. Diagnostic
information is also available through the CLI, QuickTools, Enterprise Fabric Management Suite, or Simple
SAN Connection Manager event logs and error displays.
Switch diagnostics
The SN6000 Fibre Channel Switch has three switch LEDs that are used for diagnostics: Input Power LED,
Heartbeat LED, and the System Fault LED
3
1
Input Power LED
3
Heartbeat LED
Figure 20
Switch LEDs
Input power LED is extinguished
The Input Power LED illuminates to indicate that the switch logic circuitry is receiving proper voltages. If the
Input Power LED is extinguished:
1.
Inspect the power cords and connectors. Is the cord unplugged? Is the cord or connector damaged?
• Yes—Make necessary corrections or repairs. If the condition remains, continue.
• No—Continue.
2.
Inspect the AC power source. Is the power source delivering the proper voltage?
• Yes—Continue.
• No—Make necessary repairs. If the condition remains, contact your authorized maintenance
provider.
(Figure
1
2
HP StorageWorks SN6000 Fibre Channel Switch Installation and Reference Guide
20).
2
System Fault LED
51