Installation; Site Requirements; Management Station And Workstation Requirements; Management Station Requirements For Simple San Connection Manager And - HP StorageWorks SN6000 Installation And Reference Manual

3

Installation

This section describes how to install and configure the switch.

Site requirements

Consider the following items when installing an SN6000 Fibre Channel Switch.

Management station and workstation requirements

The management station requirements for Simple SAN Connection Manager and Enterprise Fabric
Management Suite are described in
Table 8.
Table 7 Management station requirements for Simple SAN Connection Manager and Enterprise Fabric
Management Suite
Operating System
Memory
Disk Space
Processor
Internet browser
Hardware
Hardware
Table 7. Workstation requirements for QuickTools are described in
• Windows Server 2003 R2, Windows Storage Server 2003 R2
x64/x86 with SP2. This requires Microsoft hotfix QFE932755
(updated Storport storage driver). The update is available on
the Microsoft website:
http://support.microsoft.com/kb/932755.
• Windows Server 2008 x64/x86 with SP2
• Windows Server 2008 x64/x86 R2
2 GB
• 200 MB of disk space for HP StorageWorks Simple SAN
Connection Manager software
• 150 MB of disk space for HP StorageWorks Enterprise Fabric
Management Suite
2 GHz or faster
Microsoft Internet Explorer 6.0 or later
Netscape Navigator 6.0 and later
Firefox 1.5 and later
Java Runtime Environment 1.5 or higher
RJ-45 Ethernet port
PCI-e slots for the HP StorageWorks PCI-e FC HBA
CD-ROM drive (optional)
RJ-45 Ethernet port
RS-232 serial port (optional)
PCI-e slots for the HP StorageWorks PCI-e FC HBA
HP StorageWorks SN6000 Fibre Channel Switch Installation and Reference Guide 33