Selecting Typestyles - Epson LX-810 User Manual

Selecting Typestyles

You can produce a wide range of typestyles by combining different
fonts, widths, and other print variations. You can select typestyles
in three different ways: by using the SelecType feature on your
control panel, by changing the DIP switches, or by using software
commands. This section describes only how to select typestyles
with the SelecType feature. DIP switch settings are described
earlier in this chapter. Software commands are described in
Chapter 9.
You can use the control panel to choose fonts and condensed
printing. The number of beeps you hear indicates which features
you are choosing. The printer must be on line before you can use
the SelecType feature.
If the ON LINE light is blinking, press the ON LINE button once to
set the printer off line and once more to set the printer on line.
Buttons Number of beeps
I
1
2
3
1
2
Typestyles
I
Select NLQ Roman font
Select NLQ Sans Serif font
Select Condensed mode
Cancel Condensed mode
Using the Printer
3-19