Commands Arranged by Topic
ESC N
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : 1 B
Comments:
The variable n is the number of lines skipped between the last
line printed on one page and the first line of the next page. For
example, with the standard settings for line spacing (1/6-inch),
and page length (66 lines), ESC N 6 cause the LX-810 to print
60 lines and then skip 6. DIP switch 2-3 performs the same
function. This setting is cancelled by ESC 0 and also by ESC C
or ESC C 0. The value of n must be from 1-127. Overrides the
DIP switch 2-3 for the l-inch skip-over-perforation setting.
ESC O
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : 1 B
Comments:
Cancels the skip-over-perforation set by ESC N. Also, cancels
the DIP switch 2-3 for the l-inch skip-over-perforation setting.
9-14
Command Summary
N
ESC
78
27
4E
ESC
O
79
27
4F
Set Skip-over-perforation
n
n
n
Cancel Skip-over-perforation