Epson LX-810 User Manual page 13

Choosing a Place for the Printer
Note: If you plan to use a printer stand, read through the list of
requirements and suggestions below to ensure that you have the
right stand for your printer.
The stand should be able to support at least twice the weight
l
of the LX-810 printer (11.5 kg approx).
Never use a stand that tilts the printer at an angle of more
l
than 15 degrees from horizontal.
With a cut sheet feeder installed, your printer should be kept
l
level at all time.
If your paper supply is positioned below the printer stand,
l
make sure that there is enough clearance to keep the paper
from catching on the underside of the stand. Also, check to
see that the distance between the stand supports is wide
enough to accommodate the paper you will be using.
Position your printer's power cable and I/F cable so that
l
they do not interfere with paper feeding. If possible, secure
the cables to the printer stand support.
1-6 Setting Up the Printer