Multi-Part Forms - Epson LX-810 User Manual

Multi-part forms

With the built-in tractor unit, your printer can print on continuous
multi-part forms. You can use multi-part forms that have up to
three parts (including the original). Make sure you set the paper
thickness lever to the proper position; see to the table on page
2-25.
Except for the paper thickness lever setting, you load multi-part
paper the same way as continuous paper. For details, see the
section on loading continuous paper in this chapter. Also see the
sections on setting the loading position and page length in Chapter
3.
CAUTION: Multi-part forms should not be used with the
single sheet feeding system or the optional cut sheet
l
feeder.
Printing on Special Paper
Paper Handling
2-25