FF SW:
When this switch is depressed once, the paper is advanced vertically
to the next Top of Form position. This switch must be depressed
(Form Feed)
while the Printer is OFF-LINE. Otherwise, the form feed operation
will not be carried out.
The Top of Form position is initialized when the POWER switch
i s t u r n e d o n o r w h e n I N I T s i g n a l i s a p p l i e d t o t h e i n t e r f a c e
connector. Therefore, before turning the POWER switch on to
start operating the Printer, set the paper at the appropriate Top of
Form position.
LF SW:
The paper advances while this switch is being depressed.
The line spacing for paper advancement is determined by ESC A +
(Line Feed)
n code (described later). When the Power switch is turned on, the
line spacing is initialized at l/6 inch.
The line feed operation is prohibited while the Printer is actively
engaged in printing.
1.2. Indicators
POWER:
Illuminates while the Printer is receiving AC power.
Illuminates when the Printer is ready to receive data.
R E A D Y :
PAPER OUT:
Illuminates when the paper supply is near its end.
Illuminates when the Printer is in the ON-LINE mode.
ON LINE:
- 3 7 -