To Configure The Network Settings Of A Device - HP StorageWorks D2D Configuration Manual
Hp storageworks linux and unix configuration guide for d2d backup systems (ej001-90978, july 2010)
Hide thumbs
Also See for StorageWorks D2D:
- User manual (210 pages) ,
- Installation and configuration manual (59 pages) ,
- Manual (52 pages)
Table of Contents
Advertisement
To configure the network settings of a device
1.
Select the device in the list and click Configure.
2.
Enter the network details and click Configure to send the details to the HP StorageWorks D2D
Backup System. The list of available HP StorageWorks D2D Backup System on the network will
be displayed again, this time with the updated network settings shown.
3.
Make a note of the IP address of the HP StorageWorks D2D Backup System because it will be
required during iSCSI configuration.
D2D Backup System
15
Advertisement
Table of Contents
