To Identify The Required Device - HP StorageWorks D2D Configuration Manual

Hp storageworks linux and unix configuration guide for d2d backup systems (ej001-90978, july 2010)

Hide thumbs Also See for StorageWorks D2D:

Table of Contents

When the HP Discovery tool is run it will find any HP StorageWorks D2D Backup Systems on the local

network and list them by name. The name displayed by the HP Discovery tool should match the label

on the top of the HP StorageWorks D2D Backup System.

NOTE:

If no HP StorageWorks D2D Backup Systems are discovered, ensure that UDP port 8106 is open in

any firewalls that are running.

To identify the required device

If you have multiple HP StorageWorks D2D Backup Systems on the network you can use the Beacon

button to help identify the unit that you wish to configure. Select a device in the list and click Beacon.

The lights on the front of the selected HP StorageWorks D2D Backup System will flash.

Discovery

Table of Contents