Epson LX 300+II Reference Manual page 88

Two or more sheets feed at one time.
Cause
You may have loaded too
many sheets in the bin.
You may not have fanned
the stack of paper before
loading it into the bin.
The paper feeds in crooked.
Cause
The right and left paper
guides are too far apart.
The paper may be old or
creased.
There may be too much
paper in the stacker.
You may not be using the
right type of paper for the
cut-sheet feeder. For
example, your paper may
be too heavy or too light.
One page of printing has spread to two pages.
Cause
Your application software
settings may be incorrect.
88
Maintenance and Troubleshooting
What to do
Remove some sheets.
Remove the paper, fan the stack to
separate the sheets, and reload it in the
bin.
What to do
Position the paper guides to match the
width of your paper.
Use only new, clean sheets of paper.
Remove some sheets.
Make sure your paper meets the
requirements of your printer and cut-
sheet feeder. See page 115 for paper
specifications.
What to do
Check that the page-length setting and
lines-per-page setting in your application
software are correct.