Epson LX 300+II Reference Manual page 86

Paper feeding is crooked or the paper jams.
Cause
The paper supply is
obstructed.
The paper supply is too far
away from the printer.
The printer cover may be
opened.
The edge guide positions
may be incorrect.
The holes on the sides of the
paper are misaligned.
Your paper may be the
wrong size or thickness for
the printer.
When you use side-
crimped multipart forms,
the copies may not align
with the original.
The paper does not eject properly.
Cause
The page may be too long.
86
Maintenance and Troubleshooting
What to do
Make sure the paper supply is not
obstructed by a cable or some other
object.
Make sure that your paper supply is
within 3 feet (1 meter) of the printer.
Close the printer cover.
Position the edge guides at the diamond-
shaped guide marks.
Check that the holes on each side of the
paper are aligned with each other. Also
make sure the sprockets are locked and
their covers are closed.
Make sure that the paper size and
thickness are within the specified ranges.
See page 115 for continuous paper
specifications.
Raise the paper guide to keep the
printing position accurate.
What to do
Tear off the fresh supply of paper and
eject the page from the printer. Use only
paper that is within the specified length
range. See page 115.