Changing The Default Settings - Epson LX 300+II Reference Manual

Changing the Default Settings

The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting
from the printer's control panel using the Default Setting mode.
The following table lists the default settings and the options you
can select in Default Setting mode. The settings are explained in
detail after the table. For instructions on using Default Setting
mode, see page 72.
Settings
Page length for tractor
Skip over perforation
Auto tear off
Auto line feed
Print direction
Software
0 slash
High speed draft
I/F mode
Auto I/F wait time
Baud rate
Parity
Data length
Parallel I/F bidirectional
mode
Packet mode
Options
Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11,
70/6, 12, 14, 17
On, Off
On, Off
On, Off
Bi-D, Uni-D
ESC/P, IBM 2380 Plus
On, Off
On, Off
Auto, Parallel, Serial, USB
10 seconds, 30 seconds
19200, 9600, 4800, 2400, 1200, 600, 300 BPS
None, Odd, Even, Ignore
8 bit, 7 bit
On, Off
Auto, Off
Using the Control Panel
67